Hydraulic / Air Cutting
6mm to 36mm Hydraulic Nut Splitter
The Hydraulic Nut Splitter is designed to remove nuts that have corroded solid onto studs. The unit operates on any nut from 6mm to 36mm and has a manually driven hydraulic plunger.
The unit is compact and easy to operate and will require the addition of a 19mm socket or ring spanner for use.
Hydraulic Rebar Cutter
This hydraulic rebar cutter operates from 4 to 22mm and exerts 16000kgs of force to make light work of your cutting requirements.
The unit weighs 7kgs, is simple to operate and only requires the use of standard PPE for your own safety whilst in use.
The jaws are hardened to ensure that your rebar cutting is simple and effective but they may not cut special hardened material which is not standard rebar. If in doubt please give us a call.
The CPC-85 is a hand operated hydraulic cutting unit with built in safety valve designed for cutting high voltage PE IV and phone cables. The unit operates from 2mm to 85mm although it is designed for larger copper cable cutting.
THIS UNIT WILL NOT CUT STEEL CABLES AND IS NOT DESIGNED TO DO SO!
The bottom blade has a quick release mechanism allowing the unit to be placed over cables whilst in situ. Weighing only 8.5kgs it is very portable.